null  
phone: 270-618-5200

Marine Tech Tips

Seven Engine Killing No-Nos!

Seven Engine Killing No-Nos!

Posted by Stephanie Shibata on 1st Dec 2022

The way an owner drives his boat can have a drastic effect on how long the engine lasts. Don't do these seven things!1. Dry starts Most boaters are guilty of accidentally starting their engine with the prop high and dry, but I’ve seen boaters at the ramp give their engine a quick bump of t …
Improve Your Boat’s Fuel Efficiency and Range

Improve Your Boat’s Fuel Efficiency and Range

Posted by Capt. Dave Lear on 26th Sep 2022

Gas prices are high right now, so every dollar you save on fuel can be put to better use, like buying fishing tackle, for instance. Modern ­direct-injection outboards are now significantly more fuel efficient, however, there are a few tricks to help you squeeze another mile or so per gallon, which …
SPRING OUTBOARD MAINTENANCE

SPRING OUTBOARD MAINTENANCE

Posted by Bryan Myers on 27th Feb 2019

Spring will be here sooner or later even if doesn’t seem like it right now. When spring comes and the walleye bite on the river gets going or, like me, if you wait for opening weekend, you’ll want to make sure your outboard is ready and raring to go!After a long winter’s nap, there are some things t …
Tilt & Trim Maintenance

Tilt & Trim Maintenance

Posted by www.yamahaoutboards.com on 11th Aug 2017

Your outboard’s Power Trim and Tilt unit changes the outboard’s thrust angle during operation for maximum performance of both your outboard and your boat. It’s electro-hydraulic, meaning an electric pump moves hydraulic fluid upon command from the operator, tilting the thrust angle out or in. It’s p …

HARD STARTING ENGINE?

Posted by Kevin Falvey on 17th Mar 2017

Outboards start like a car; just tilt ‘em down and turn the key. At least newer ones do. But it wasn’t always that way. There was a time when you had to know how to start your engine. Carbureted two-strokes can be fussy, especially when cold.Now, there’s still plenty of carbureted two-strokes in ser …