This listing is for a Remanufactured Complete Mercruiser Bravo III Drive Shaft Assembly, which will fit models from 1995 to 2022. As part of the remanufacturing process, all seals, bearings, and gears will be replaced with new parts. When ordering, please specify which gear ratio and whether you have a single or dual sterndrive setup on your boat. The assembly is available in the following ratios: 1.81, 2.00, and 2.20. Please refer to the below chart:
| Upper Gear Tooth Count |
Lower Gear Tooth Count |
Complete Ratio |
| 29/27 | 15/19 | 1.36:1* |
| 32/27 | 15/19 | 1.50:1* |
| 32/27 | 18/25 | 1.65:1* |
| 29/27 | 16/27 | 1.81:1 |
| 32/27 | 16/27 | 2.00:1 |
| 30/23 | 16/27 | 2.20:1 |
| 30/23 | 13/24 | 2.43:1* |
| *Limited Availability on these Lower Units | ||
A Limited One-Year Warranty is included in the order. An additional Twelve-Month Extended Warranty is available. See options and pricing above. Please read the terms of OBR's New & Remanufactured Parts Warranty at https://www.obparts.com/obr-red-rhino-new-and-remanufactured-parts-warranty/.
There is no additional core charge. A core return label will be sent with the replacement assembly, at which point the original assembly can be returned for inspection. If the core passes inspection, a refund check of up to $200.00 will be issued to the buyer; otherwise, the core will be scrapped and not returned.
SHIPPING: Additional shipping fees to Alaska, Hawaii, US Territories, or International Shipping will be calculated after checkout. You will receive an email and a PayPal money request for the additional shipping charges at the email address provided.
If you have any questions, please contact us through e-mail at customerservice@marinepartswarehouse.com. To ensure that the proper product is ordered, please include your sterndrive model and serial number in any message.
1 Review
-
Remanufactured Bravo 3 outdrive
Product shipped quick and if it’s not a new unit it should be . Looks great .
