null  
phone: 270-618-5200

Remanufactured OBR / Johnson & Evinrude 1978-1998 88/90/100/115 HP V4 Crossflow Flatback Powerhead

$2,340.00 - $2,540.00
1 review Write a Review
Shipping:
$135.00 (Fixed Shipping Cost)

This listing is for a Remanufactured Johnson/Evinrude 88/90/100/115 HP V4 Crossflow Powerhead, which will fit the following models:

  • 88/90 HP models from 1981-1987
  • 88/90 HP models from 1988-1991 [Core Value: $50]
  • 88/90 HP models from 1992-1998 [Core Value: $100]
  • 100 HP models from 1988-1991 [Core Value: $50]
  • 100 HP models from 1992-1988 [Core Value: $100]
  • 115 HP Flatback models from 1978-1984

Before ordering, please select the appropriate model from the list above and check for any price adjustments.

All the cylinders have been bored to a maximum of .030, the pistons, rings, wrist pins, and all bearings have been replaced, and the powerhead has been repainted. The Displacement of this powerhead measured in Cubic Inches is 99.6.

A Gasket Kit is included in the order, as is a Limited One-Year Warranty. An additional Twelve-Month Extended Warranty is available for $440.00. Please read the terms of OBR's New & Remanufactured Parts Warranty at https://www.obparts.com/obr-red-rhino-new-and-remanufactured-parts-warranty/.

There is no additional core charge. For those models with a core value, a core return label will be sent with the replacement powerhead, at which point the original powerhead can be returned for inspection. If the core passes inspection, a refund check of up to the amount listed above will be issued to the buyer; otherwise, the core will be scrapped and not returned.

SHIPPING: Additional shipping fees to Alaska, Hawaii, US Territories, or International Shipping will be calculated after checkout. You will receive an email and a PayPal money request for the additional shipping charges at the email address provided. (Some items are excluded from international shipping.)

If you have any questions, please contact us through e-mail at customerservice@marinepartswarehouse.com. To ensure that the proper product is ordered, please include your motor's model number in any message.

1 Review

  • 3
    JOHNSON 90 POWERHEAD

    Posted by stephen wilson on 3rd Nov 2021

    Fired it off on the hose to make sure all was well before taking it to the lake. Good thing I did as it immediately started squirting water from one of the head gaskets. (block side/# 1 cyl) Retorqued head bolts and it seems to have stopped. Will have to wait for better weather to go to the lake and see if its ok.