null  
phone: 270-618-5200

Used 1997 Johnson 90 HP 4-Cylinder Carbureted 2-Stroke Outboard Motor – 20" Shaft

$3,250

Used 1997 Johnson 90 HP Carbureted 2-Stroke Outboard Motor – 20" Shaft

This used 1997 Johnson 90 HP outboard features a four-cylinder carbureted two-stroke engine with electric start, remote steering, and power tilt and trim.

This standard-rotation outboard has a 20-inch shaft, 110–130 PSI compression across all four cylinders, and fresh gear oil. This engine requires premixed gasoline and two-stroke oil.

Important – Premix Fuel Required

PREMIX ONLY. Two-stroke oil must be mixed with the gasoline before operating this engine. Do not run on straight gasoline. Confirm the correct fuel-to-oil ratio before use.

Engine at a Glance

Engine Type Carbureted 2-Stroke
Cylinders 4
Shaft Length 20 Inches (Long)
Weight 319 lbs
Fuel System Carbureted
Lubrication Premix Only
Starting Electric
Steering Remote
Tilt & Trim Power
Rotation Standard
Compression 110–130 PSI
Engine Hours Unknown
Model Provided J90
Serial Number G4318513

Engine Condition & Testing

The following condition and service information is reported for this used Johnson 90 HP:

  • 110–130 PSI compression across all four cylinders
  • Fresh gear oil
  • Premix-only fuel requirement
  • Electric start
  • Power tilt and trim
  • Standard-rotation lower unit
Engine Hours: Operating hours are unknown. Review the actual photographs, compression readings, and running video for condition information.

Watch This Engine Run

Watch this 1997 Johnson 90 HP outboard running.

Propeller, Controls & Rigging

Not Included:

  • Propeller
  • Remote controls and cables
  • Battery
  • Fuel tank and fuel line
  • Engine stand
  • Additional rigging unless specified

Verify shaft length, transom, steering, controls, and rigging compatibility before purchasing. Premixed fuel is required.

Shipping & Local Pickup

Freight shipping and local pickup are available from Marine Parts Warehouse in Scottsville, Kentucky. Use the freight quote tool on this page for a shipping estimate.

Used engines are purchased by contacting our team by phone or callback request.

Have an Outboard to Trade In?

WE ACCEPT TRADES ON LOCAL PICKUPS ONLY!

Trade-ins are subject to evaluation and approval. We do not accept trade-ins on shipped orders.

Request a Trade-In Quote

Important Purchase Information

This used outboard is sold as-is, with no returns, subject to applicable law. Review the photographs, compression readings, and running video before purchasing. Contact us with any questions.

Freight Delivery & Damage Inspection

Important: Fully inspect your engine, including removing protective wrapping, before the delivery driver leaves.

If damage is found, describe it on the delivery receipt or Bill of Lading (BOL) and obtain the driver's signature. Photograph damage on and off the truck when possible.

Email or mail the signed BOL to Marine Parts Warehouse for carrier claim assistance. Retain the damaged engine for up to two months in case the carrier requires inspection or possession.

Damage Reporting Limits

90 Days – Visible Damage

Damage noted on the signed delivery receipt or BOL.

15 Days – Concealed Damage

Damage not documented at delivery.

Limits run from the delivery date. Claims remain subject to applicable freight carrier requirements.

Questions About This Engine?

Contact Marine Parts Warehouse for questions about condition, premix requirements, compatibility, purchasing, or freight shipping.

Email Us About This Engine

Browse More Used Outboard Motors

Used outboard motors are sold as-is. Compression numbers and running videos are provided when available. Please contact us with any questions before purchase.